I set up a $190 mesh Wi-Fi system at home, and it handled a dozen 4K video streams with ease
'ZDNET Recommends': What exactly does it mean?
ZDNET's recommendations are based on many hours of testing, research, and comparison shopping. We gather data from the best available sources, including vendor and retailer listings as well as other relevant and independent reviews sites. And we pore over customer reviews to find out what matters to real people who already own and use the products and services we’re assessing.
When you click through from our site to a retailer and buy a product or service, we may earn affiliate commissions. This helps support our work, but does not affect what we cover or how, and it does not affect the price you pay. Neither ZDNET nor the author are compensated for these independent reviews. Indeed, we follow strict guidelines that ensure our editorial content is never influenced by advertisers.
ZDNET's editorial team writes on behalf of you, our reader. Our goal is to deliver the most accurate information and the most knowledgeable advice possible in order to help you make smarter buying decisions on tech gear and a wide array of products and services. Our editors thoroughly review and fact-check every article to ensure that our content meets the highest standards. If we have made an error or published misleading information, we will correct or clarify the article. If you see inaccuracies in our content, please report the mistake via this form.
Close Home Home & Office Networking I set up a $190 mesh Wi-Fi system at home, and it handled a dozen 4K video streams with ease The Tenda BE5100 three-pack mesh Wi-Fi system is a low-cost, high-speed, easy-to-use package that kills wireless dead spots.
Written by
Adrian Kingsley-Hughes, Senior Contributing EditorSenior Contributing Editor May 12, 2026 at 1:08 p.m. PT
Tenda BE5100 3-Pack Mesh Wi-Fi System
4 / 5 Very goodpros and cons
Pros- Makes mesh Wi-Fi easy to set up
- App offers pro-grade features, such as diagnostics
- Excellent hardware with Wi-Fi 7 support for a fraction of the price of some systems.
- Units feel a bit cheap and "plasticky."
- Spare satellite units retail for $100 each.
Follow ZDNET: Add us as a preferred source on Google.
There's nothing more frustrating than sitting on your couch or at your desk and noticing a limited Wi-Fi signal. I don't know about you, but I've been seen with my phone in my outstretched arm, doing something that looks like a weird yoga pose, trying to get a better signal.
Also: I set up a $4 router reboot timer, and it's made my internet reliably faster
Back in the day, the solution I'd fan back onto would be to set up a repeater or hook up another Wi-Fi router to spread the signal. Not a great solution because it didn't allow for a smooth handover between the different routers. I also dabbled with Wi-Fi extenders of all sorts.
Yeah, they were mostly a waste of money. Even the ones that worked didn't work all that well. The extenders often made a good internet connection bad, and a mediocre connection terrible.
But there wasn't much of an alternative because, back then, I didn't have a Tenda BE5100 3-pack Mesh Wi-Fi System.
ZDNET RECOMMENDS
Tenda BE5100 3-Pack Mesh Wi-Fi System
A three-pack mesh networking that's cheap, easy to set up, and blazingly fast.
details View at AmazonBest wifi range extenders deals of the week
- TP-Link RE550 AC1900 Wi-Fi Extender: $43 (save $18)
- TP-Link RE315 AC1200 Wi-Fi Extender: $19 (save $12)
- Netgear EAX16 Dual-Band Wi-Fi 6 Mesh Range Extender: $77 (save $44)
- TP-Link RE715X AX3000 Wi-Fi 6 Range Extender: $70 (save $50)
- Netgear EXS25 BE5000 Wi-Fi 7 Range Extender: $100 (save $50)
The mesh advantage
Mesh Wi-Fi brings the old idea of Wi-Fi extenders into the modern age. You have a main unit, and then satellites that you dot about the place. They all share the same Wi-Fi name, and the handoff between the different satellites as you move from room to room is smooth and seamless.
One problem is that many of the mesh systems that I've tested are expensive. Some units have been $500 or more. They're good systems for sure, damn good, but that's a lot of money to put down.
Also: I've fully converted to adaptive chargers from fast ones and already feel safer
This cost is why I've been on the lookout for quality mesh systems that don't cost the earth. And this is exactly what the BE5100 (also called the ME6 Pro) offers. You get three units, each packed with five internal antennas and five independent high-power FEMs (Front-End Modules), offering super-fast connectivity capable of handling broadband speeds up to 2,000 Mbps and Wi-Fi speeds of 688 Mbps at 2.4 GHz and 4,323 Mbps at 5 GHz.
And yes, for those who like to be at the cutting edge, this system is Wi-Fi 7 compatible, so you're future-proofed. For those with many devices at home, such as modern households that have embraced the Internet of Things, any network you build using the BE5100 can handle over 160 devices.
Yes, there are Ethernet ports on the back of the satellites.
Adrian Kingsley-Hughes/ZDNETNot a numbers person? You can rest assured that this capability is more than enough for dozens of devices to stream videos, make video calls, back up files to NAS boxes, and doomscroll endless cat videos.
Also: The 4 streaming services I swear by - and my bill is just $40 a month
The average home or small office setup would be hard-pressed to saturate this network.
Blanket coverage
The three units are enough to flood an area of 6,600 square feet, which is a pretty big home. I've tested this setup in an old stone house with walls up to three feet thick, and the three units could blanket the entire two-story home with excellent internet access, which the cheap router bundled with the broadband package failed at miserably.
The Tenda app offers a lot of power and control over the network you create.
Screenshot by Adrian Kingsley-Hughes/ZDNETOne drawback with many mesh systems is that they can be complicated to set up, and it's not long before they start asking you about things like IP addresses. While a small amount of setup is required with the BE5100, the Tenda app (iOS/Android) guides you through the process, making it as easy as possible. And if you mess up, you can always start again.
Also: Traditional Wi-Fi router vs. mesh: How to decide between the 2 popular networking options
Once you set up one unit as your main unit, meshing the others is simply a case of pressing the mesh button for a few seconds and using the app to add the satellite to the network.
Simple.
NFC and diagnostics
Another cool little feature of this system is that the kit comes with a tiny self-adhesive NFC tag. Once you've set up a network, you can use the Tenda app to write the network details to the tag, making it easy for others to connect to the network. I don't remember another router app having this feature.
The writable NFC tag is a nice touch.
Adrian Kingsley-Hughes/ZDNETA sidenote here, though -- the app doesn't write-protect the tag (this is so you can rewrite it at a later date if the network settings change), so someone with ill intent could mess with the tag and rewrite it. My advice would be to use an app to password-protect the tag in a business setting to prevent it from being changed.
Another feature of the system that I appreciate a lot is the app's diagnostics. For those times when something's broken, this feature always delivers. I threw some simulated errors at the network, and it picked them up and offered fixes.
Performance-wise, the unit never missed a beat. My office broadband is a decent 150 Mbps fiber line, but that's nothing for a system like this. So I had to bring out the big guns -- my Starlink dish. When set up properly, this dish can achieve download speeds of 400 to 500 Mbps.
Also: My new favorite AirTag alternative fits perfectly in my wallet - and is seriously durable
This is only a quarter of the 2,000 Mbps that the BE5100 can handle, but it's a decent load. The system had no problems handling this bandwidth and did a good job of distributing it among the network's devices.
I loaded the network using 4K video streams from both Netflix and YouTube. I was able to get a dozen streams running simultaneously (my MacBook Pro was a champ at handling eight streams before Chrome's RAM usage went crazy), and I estimate I could have had another half a dozen streams going.
I then decided to see how the Wi-Fi would handle heavy usage, so I pushed as much data as I could across the test network I set up, by moving data to and from two of my Ugreen DH4300 4-bay NAS boxes and a Ugreen DXP8800 Plus.
The DH4300 can only handle about 300 Mbps across a network each, which is just background noise, but the DXP8800 Plus is very capable and can handle a massive 20,000 Mbps of bandwidth across its two gigabit Ethernet ports. The Wi-Fi network had no problem moving a 30GB test file in under 100 seconds. I was thoroughly impressed with the results.
ZDNET's buying advice
Normally priced at $220, the Tenda BE5100 3-Pack Mesh Wi-Fi System is competitively priced. Right now, there's a deal on at Amazon where you can pick up a three-pack system for $190. If you've got a smaller space to cover with signal, there's a 2-pack on offer for $140, good for up to 4,600 square feet. If you don't need three units, there's no point paying for them (but if you need to add another, that'll be $100, so don't make the wrong choice).
Featured reviews
-
I walked 3,000 steps with my Apple Watch, Google Pixel, and Oura Ring - this tracker was most accurate
-
After using the MacBook Neo for weeks, switching to the Air has been refreshingly sweet
-
I bought an earwax camera for my toolkit and use it for everything but my ears
-
LG G6 vs. Samsung S95H: I compared the best OLED TVs of 2026 and made a tough choice